Skip to the content
stage-check Help Mac beta coming soon

stage-check / Help

HDCP error or black video on the projector from a Mac

You see a black screen, an HDCP error, or a long delay before the picture appears. HDCP is copy protection that the Mac and every box between it and the screen have to agree on. One box that does not agree is enough.

Fix it by hand, in this order

  1. Take out the middle boxIf you can, connect the Mac to the display with one direct cable, without a switcher or extender in between. Ask the AV person whether that is possible.
  2. Try a USB-C to HDMI adapterA university IT guide says these adapters negotiate HDCP in place of the Mac, so the venue's gear no longer talks to the Mac directly.
  3. Ask about the HDCP versionAsk AV which HDCP version their extender or switcher supports and what the display requires. An engineering guide says to verify the version on the source, cable and display.
  4. Ask for a splitter or scalerAsk whether an HDMI splitter or scaler can go in front of the box that is rejecting your laptop.
  5. Fall back to their computerIf none of it works in time, ask to use the house computer and open your demo from a link.

Why it happens

An engineering guide lists a black screen, a downgrade from HDR, 'HDCP Error' messages and a long delay as symptoms of an HDCP or HDMI version problem. Its example is a display locked to HDCP 2.2 behind a cheaper extender that supports only 1.4, so the handshake fails. At one venue on 2026-11-14 a Mac logged 275 HDCP aborts in about seventeen minutes while the screen kept dropping. That log does not prove HDCP was the cause.

Longer guides

What stage-check does about it

stage-check cannot read the HDCP state of the link. When the Mac's log shows HDCP aborts, it counts them and shows the number as evidence, not as a verdict. It also watches for the screen dropping out, and gives NO-GO at two removals in five minutes, with a line you can read to the AV person.

The Mac beta is coming soon. Failure modes: VG07.

Questions

What is HDCP?

It is a copy protection handshake between the source, any boxes in the chain, and the display. An engineering guide says it can fail when the versions differ, for example HDCP 2.2 at the display and 1.4 in an extender.

Can I tell from the Mac that HDCP is the problem?

Not for certain. The Mac's log at one venue showed 275 HDCP aborts alongside a screen that kept dropping, but the log does not prove which caused which.

Sources

Every claim on this page traces to a source above that was opened and read on 2026-11-15. Search results that were not opened are not cited.